国产又粗又猛又爽又黄的黄牛视频-欧美日韩精品网址-国产成人麻豆h视频在线观看-蜜臀av区一二三爽免费播放-久久久伦理精品-99精品资源在线视频-伊人久久大香樵-久久人妻人人爽-性欧美少妇煌妇喷水,麻豆免费在线观看视频网站,天天射天天干天天要,91精品国自产拍老熟女露脸

INCOFLUXR NT110 埋弧焊劑

INCOFLUX NT110 埋弧焊劑設計與MONEL 60／67焊絲匹配使用，MONEL 60焊絲是一種含銅30％含鎳70％的合金，而MONEL 67焊絲含銅70％含鎳30％。這種焊劑的典型應用是與MONEL 60匹配，用于MONEL 400合金自身之間及其與鐵素體金屬材料之間的開坡口焊接。這種焊劑的一個主要應用是與MONEL 60填充金屬相匹配，在碳鋼表面堆焊形成耐蝕保護層。這種焊劑還可以與MONEL 67填充金屬匹配應用于MONEL 450或其它銅-鎳合金（銅鎳比例為：90／10、80／20及70／30）的焊接。如果在鋼的表面進行堆焊，需要用INCONEL 61或MONEL 60填充金屬打底作過渡層。

儲藏和干燥條件

焊劑密封在未開啟的容器中可以無限期保存。如果焊劑暴露于潮濕環境中，可以在500^oF保溫烘干2小時或600^oF保溫烘干1小時后使用。

The INCOFLUX NT110 submerged arc welding is designed to match the MONEL 60/67 welding wire, and the MONEL 60 welding wire is an alloy with 30 % copper and 70 % of copper content, while MONEL 67 electrode contains 70 % nickel and 30 %. The typical application of this flux is to match the MONEL 60 for the MONEL 400 alloy itself and its weld with the open groove between the ferrite metal materials. One of the main applications of this flux is to match with the MONEL 60 filler metal, which is surfacing on the surface of carbon steel to form an anticorrosive coating. This flux can also be used to weld MONEL 67 with metal matching for MONEL 450 or other copper-nickel alloys (90/10, 80/20 and 70/30 for copper and nickel). If the surface of the steel is surfacing, the metal bottom will need to be filled with INCONEL 61 or MONEL 60.

Welding parameters: open groove welding or surfacing: apply DCEP current and narrow weld path

Electrode dry extension flux layer thickness of wire diameter current/ampere voltage/v welding speed electrode

0.062 in

1.6 mm 260-280 30-33 8-11 in/min

In 200-280 - mm/min 7/8-1

1/2-1 in 22 to 25 mm

13 to 25 mm

0.093 in

2.4mm 300-350 32-35 8-11 in/min

In 200-280 - mm/min 7/8-1

22-25 mm 3/4-5/4 in

19 to 32 mm

Electrode swing surfacing welding: the use of DCEN current mode, when the wire diameter is 0.062 in, the oscillation frequency is 50-70 weeks/min; When the wire diameter is 0.093 in, the oscillation frequency is 35-50 weeks/min

0.062 in

1.6 mm 260-280 32-35 4 in/min

100 mm/min in 7/8-1

1/2-1 in 22 to 25 mm

13 to 25 mm

0.093 in

2.4mm 300-400 34-37 4 in/min

100 mm/min in 7/8-1

22-25 mm 3/4-5/4 in

19 to 32 mm

Storage and drying conditions

The flux seals can be kept indefinitely in unopened containers. If the solder is exposed to wet conditions, it can be used after an hour of thermal insulation drying for 2 hours or 600oF.

Flux particle size

Taylor's mesh: 10 times 100

packaging

The barrel cover is covered with a 60 - pound polyethylene barrel sealed with rubber gasket